Mokit: Skyline R32 Part 8

Hi,

Its been awhile since I last update this blog. 

Several time i came here but i got no time to write until today.

Now we are at Part 8 of our R32 built. 

Its have been a great journey so far.

Mokit: Skyline R32 Part 5

1:1 scale Skyline R32 GTR

Hi,

Welcome to Part 5 of Aoshime Nissan Skyline GTR R32.

This part we will see interior built up and a bit of openable hood hinges trial.

The green color thing is the wire insulated for hinges built up. I used paper clip as a material to substitute metal rod. The green thing supposed to be the insert joint of the metal and going to be glued to the body of the kits.

Close up angle of all the material involved. Before this were inserted I has cut the firewall engine in straight line for the metal to be inserted as the back. This will hide the metal thus making its more realistic.

Do to the others half.

Please take note for the green things. That the correct positions to be place the green things.

Other angle of the green this to be operated.

Sprayed this seat flat black. Masking tape were put to maintain the correct color of the seat with flat black and grey. 

Skyline R32 in the making.

Mock up steel wiring inside the engine bay to imitate the real brake line.

I just do this at my heart content and with a bit of picture for reference. The bracket that hold the wire in place is made out of eraser. I carve it as glue it to the firewall.

Engine wiring detailing close up.

Put some color at the parts. Yellow on the brake fluid pump cap, yellow on the distributor, red on the air filter box, and silver on the engine pulley.

Another angle for clear view.

Start merging the dashboard to the chassis. Please noted that the chassis has been cover with felt to represent carpet inside the car. The felt were glued with 3 second glue and the felt has been cut according to the floor panel.

Felt cover up almost all the floor panel.

Mock up the chassis with the upper body. This angle to view the dashboard. See the felt lay flat on the floor panel just like carpet.

Engine mock up with the upper body, car seat complete painted. 

Engine mock up. See how thing start to pop up from that tiny tiny detail.

Complete part 5.

This part show how to detail up the engine bay with wire and play with some color. I didn't apply any old and used effect on the engine bay since this is my first kit. I honestly didn't want to ruin my kit from my mistake doing aging. 

Well, that Part 5. Keep mokit bruh!!

KKuet.al

Mokit: Skyline R32 Part 4

Brake and brake pump complete painted.

Welcome to the Fourth episode of this Aoshima Skyline R32 kit build up.

TOOLS: DAISO AEON JUSCO AND MR.DIY TESCO IS A GREAT PLACE TO GET BUDGET TOOLS

Hi,

Have you seen this 2 shop? Both shop offer common household item and tools for hardware, soft work and minor adjustment at lower prices. Almost all the tools sold at this both shop can be used on our mokit hobby.

Mokit: Skyline R32 Part 3

TAMIYA R32, This in my stash now!

Hi.

Meet again in this part 3 of my Nissan Skyline R32 build up.

On the last post we stop at wetsanding the godzilla. Wetsanding is the term used for sanding on any surface with the help of water. Water help to smoothen the sanding and give a silky and nice surface. Do not apply too much pressure when wetsanding as it will easily torn up your kit.

MOKIT: CHANGE NAME FROM NUBISFOREVER TO MOKITFOREVER

Hi,

Decided to change my blog name as Nubis seem a bit inappropriate here. Since Mokit is what we are talking here so I think its best to pin point what we are doing here so that everybody can related and understand a bit seconds earlier.

Our new link is as follow,

http://www.mokitforever.blogspot.com

Hope I am not losing any loyal reader after change this name. 

Happy new year to all.

KKuet.al

Some word for the flying time Sept 2014

Hi all,

Thank you for all your support and time spend in this small blog of mine.

Throughout the time from this blog existance the pageview has increase so much compared too before. Because of that i thank to all of you readers out there.

I will make this blog as informative and interactive as it can be so that you can get something from this small blog of mine.

For the current post i'm a bit preoccupied to post or even making some mokit. But rest assured i will not make this blog a spider web a corner.

Till next time.

See you again.

Kku et.al

Nubis: Skyline R32 Part 2

Parts that need attentions.

Hi,

After I done prime all the parts needed. I then start to spray all the important part with DPI Anchor Silver color for basecoat. Silver is said to be capable of giving shiny and reflecting effect to the color above it. 

Nubis: Skyline R32 Part 1

I start prime all the part of the kit with DPI Anchor primer surfacer grey color. Primer of this kit were done with not much layer. I do recall that i only put one layer of primer only. 

After all the designated part were let to dry. The primed part were then sprayed with silver color to maximize shining effect. Not all part were sprayed with silver. Only the part that i need to shine were sprayed. 

After silver painting were dry. I try to dry fit all the painted parts. Indeed, i had to cut a thin layer of the painting to ease fitting. 

So far, all process were smooth and easy. 

Nubis: Skyline R32

Hi

This is my first kit, Nissan Skyline GTR BNR32 from Aoshima.

It come with engine detail and realistic underbelly.

Nubis: Gunpla dan JS Hobby yang owsem

Salam Nubis,

Baru-baru ni dapat memujuk kawan untuk membeli Gundam di JS Hobby. Kawan aku terpikat dengan Gundam Wing Endlass Waltz itu pun selepas sejam lebih die berfikir. JS Hobby memiliki pilihan Gundam yang sangat banyak baik dari MG, PG, RG etc. yang aku sendiri pun tak tau. 

Selain Gundam JS Hobby juga menjual mokit MotoGP Tamiya, model Kotobukiya, jet pejuang Hasegawa, Zoids, Laboratory set yang terdiri daripada set angkasa dan kapal selam dan banyak lagi. 

Apa yang membuatkan aku terus menerus datang kesini ialah kelengkapan dan peralatan Tamiya yang dijualnya. Terdapat semua kelengkapan dan peralatan mokit Tamiya yang korang perlukan disini baik dari Pla plate, Polish wax, cat dan spray, weathering set, market, cement, dan bermacam-macam lagi. Aku akan terus datang untuk mendapat peralatan detail up seperti polish, cat dan keluaran terbaru metallic dust yang membuatkan mokit korang kelihatan berkilat seperti besi. 

Berikut ialah GunPla kawan aku untuk tatapan kali ini. 

How to go to JS Hobby?

JS Hobby  

09-01, Jalan Mewah Ria 5/4, 

Taman Bukit Mewah, 

81200, Johor Bahru

p/s : Konsep kedai dia close store, kena tekan bell baru die bukak pintu. Kedai dia tingkat atas.

Online Store 

www.jshobby.cc

Facebook

www.facebook.com/jshobbycc 

p/s: kalau korang kesana mentionlah nubisforever.blogspot.com, OK?

KKu et.al